Thermal conductive PCM Phase Change Material Pad
Ziitek company is a manufacturer of thermal conductive gap fillers,
low melting point thermal interface materials, thermal conductive
insulators, thermally conductive tapes, electrically & thermally
conductive Interface pads and thermal grease,Thermal Conductive
plastic,Silicone Rubber,Silicone Foams,Phase Changing Materials
products, with well-equipped testing equipment and strong technical
force.
TIC™800A series is low melting point thermal interface material.At 50℃, TIC™800A series begins to soften and flow, filling the microscopic
irregularities of both the thermal solution and the integrated
circuit package surface, thereby reducing thermal resistance.
TIC™800A series is a flexible solid at room temperature and freestanding
without reinforcing components that reduce thermal performance.
TIC™800A Series shows no thermal performance degradation after 1,000
hours@130℃,or after 500 cycles, from -25℃ to 125℃.The material
softens and does not fully change state resulting in minimal
migration (pump out)at operating temperatures.
Features
> Highly compliant surfacecharacteristic with highthermal
conductivity.
> High thermal conductive andHigh dielectric strength.
> Low thermal resistance with high voltage isolation
> Resistant to tears and punctures.
Applications
> Power conversion equipment
> Power semiconductors:
> T0 packages, MOSFETs & IGBTs
> Audio and Video components
> Automotive control units
> Motor controllers
> General high pressure interface
| Typical Properties of TIC™800A series |
| Product Name | TIC™805A | TIC™808A | TIC™810A | Test Method |
| Color | Gray | Visual |
| Thickness | 0.005"/0.126mm | 0.008"/0.203mm | 0.010"/0.254mm | ***** |
| Thickness Tolerrance | ±0.0008"/0.019mm | ±0.0008"/0.019mm | ±0.0012"/0.030mm | ***** |
| Specific Gravity | 2.5 g/cc | Helium Pycnometer |
| Phase change softening Temperature | 50℃-60℃ | ****** |
| Temperature Range | -25to 125℃ | ****** |
| Thermal conductivity | 2.5W/mK | ASTM D5470 |
| Thermal Impedance@50psi | 0.55℃-in²/W | 0.062℃-in²/W | 0.074℃-in²/W | ASTM D5470 |
| 0.35℃-cm²/W | 0.40℃-cm²/W | 0.48℃-cm²/W |
Standard Thicknesses:
0.005"(0.127mm),0.008"(0.203mm),0.010"(O.254mm)
Consult the factory alternate thickness.
Standard Sizes:
10"x 16"(254mm x 406mm)16" X 400’(406mm x 121.92M)
TIC™800A series are supplied with a white release paper and a bottom liner.
TIC™800A series is available in kiss cut an extended pull tab liner or
individual die cut shapes.
Peressure Sensitive Adhesive:
Peressure Sensitive Adhesive is not applicable for TIC™800A series products.
Reinforcement:
No reinforcement is necessary.
Why Choose us ?
1.Our value message is'' Do it right the First time, total quality
control''.
2.Our core competencies is thermal conductive interface materials
3.Competitive advantage products.
4.Condidentiality agreement Bussiness Secrect Contract
5.Free sample offer
6.Quality assurance contract
FAQ:
Q: Are you trading company or manufacturer ?
A: We are manufacturer in China.
Q: How do I request customized samples?
A: To request samples, you can leave us message on website, or just
contact us by send email or call us.
Q: What's the thermal conductivity test method given on the data
sheet ?
A: All the data in the sheet are actual tested.Hot Disk and ASTM
D5470 are utilized to test the thermal conductivity.
